Chapter 4: AMI BIOS
4-11
!
Remote Access Configuration
You can use this screen to select options for the Remote Access Configu-
ration. Use the up and down <Arrow> keys to select an item. Use the
<Plus> and <Minus> keys to change the value of the selected option.
Remote Access
This feature allows the user to enable or disable the function of Remote
Access. If :Disabled" is not select, then you can select a Remote Access
type. The options are "Enable" or "
Disabled
".
Serial Port Number
Select the serial port you want to use for console redirection. You can set
the value for this option to either "
COM1
" or "COM2".
Serial Port Mode
Select the baud rate you want the serial port to use for console redirection.
Select "115200 8,n,1" to select 115200 as the baud rate (transmitted bits
per second) of the serial port. Select "57600 8,n,1" to set 57600 as the
baud rate (transmitted bits per second) of the serial port. Select "19200
8,n,1" to set 19200 as the baud rate (transmitted bits per second) of the
serial port. The default setting is "
115200 8,n,1
".
Flow Control
Select the flow control for console redirection. You can set the value for
this option to one of the following: "
None
", "RTS/CTS" or "XOn/XOff".
