Supero A+ SERVER 4042G-6RF, Руководство пользователя

Страница: 26 / 116

2-10
A+ SERVER 4042G-6RF/TRF User's Manual
2-7 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SCSI drives and
backplane have been properly installed and all connections have been made.
Checking the Drive Bay Setup
•
All drives can be accessed from the front of the server. For servicing the CD/
DVD, floppy or other 5.25” drives, you will need to remove the top/left chassis
cover. The hot-swap disk drives can be installed and removed from the front of
the chassis without removing any chassis covers.
•
To install components into the 5.25" drive bays, you must first remove the top/left
chassis cover as described in the previous section. Refer to Chapter 6 for details.
•
Refer to Chapter 6 if you need to install a CD/DVD and/or floppy disk drive to
the system.
•
Depending upon your system's configuration, your system may have one or more
drives already installed. If you need to install drives, please refer to Chapter 6.
2-8 Check the Airflow
Airflow is provided by three 9-cm hot-swap chassis fans working in conjunction with
three 8-cm exhaust fans, which are located at the rear of the chassis. The system
component layout was carefully designed to promote sufficient airflow through the
chassis. Also note that all power and data cables have been routed in such a way
that they do not block the airflow generated by the fans. Keep this in mind when
you reroute them after working on the system.
2-9 Supplying Power to the System
The last thing you must do is to provide input power to the system. Plug the power
cords from the power supply modules into a high-quality power strip that offers
protection from electrical noise and power surges. It is recommended that you use
an uninterruptible power supply (UPS). Finally, depress the power on button on the
front of the chassis.