Supermicro X5DPR-TG2 Plus, Руководство пользователя

Страница: 61 / 110

Chapter 4: BIOS
4-11
Clock Spectrum Feature
I f " E n a b l e d " , t h e B I O S w i l l s e n s o r a n d a t t e m p t t o r e d u c e t h e
Electromagnetic Interference caused by the components. The options are
Enabled and Disabled .
SMART Device Monitoring
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a
technology developed to manage the reliability of the hard disk by
predicting future device failures. The hard disk needs to be S.M.A.R.T.
capable. The options are Enabled , and Disabled. (*Note: S.M.A.R.T.
cannot predict all future failures. S.M.A.R.T. should be used as a warning
tool, not as a tool to predict the device reliability.) The options for this
setting are Disabled and Enabled.
ECC Configuration
This setting lets you enable or disable ECC (Error Correction and
Checking). The options are ECC and Disabled.
ECC Error Type
This setting lets you select which type of interrupt will be activated as a
result of an ECC error. The options are None , NMI (Non-Maskable
Interrupt), SMI (System Management Interrupt) and SCI (System Control
Interrupt.
SERR Signal Condition
This setting specifies the conditions required to qualify as an ECC error.
Options are None , Single Bit, Multiple Bit and Both.
! ! ! ! !
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.