Supermicro X5DPR-TG2 Plus, Руководство пользователя

Страница: 60 / 110

4-10
SUPER X5DPR-TG2+ User's Manual
Mode
Specify the type of device that will be connected to serial port B.
Options are Normal and IR (for an infrared device).
Base I/O Address
Select the base I/O address for serial port B. The options are 3F8,
2F8 , 3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port B. Options are IRQ3
and IRQ4.
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller.
The options are Enabled (user defined), Disabled and Auto (BIOS
controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
Primary and Secondary.
! ! ! ! !
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Serial ATA RAID Feature
Select Enable to enable the functin of Serial ATA RAID. The options for
t h i s s e t t i n g a r e D i s a b l e d a n d E n a b l e d . ( * F o r t h e W i n d o w s O S
environment, use the RAID driver if this feature is set to "Enabled". If
"disabled", use the "Non-RAID" driver.)