14
SuperStorage SSG-136R-NR32JBF User's Manual
Figure 1-6. Rear I/O Panel
IPMI LAN Ports
Two 1Gb IPMI LAN ports (LAN1/2) are located on the I/O back panel. If both ports are plugged
in, LAN1 is the active port and LAN2 is redundant. If only one LAN port is used, LAN2 is
preferred. LAN2 is the left port and LAN1 is the right port.
Refer to the LED Indicator section for LAN LED information.
Unit Identifier Button
A Unit Identifier (UID) button and a rear LED Indicator (UID-LED) are located on the I/O back
panel. When the user presses the UID button, the UID LED indicator will be turned on. Press
the UID button again to turn off the UID LED. The UID indicator provides easy identification
of a system unit that may be in need of service.
Note:
UID can also be triggered via IPMI on the controller board. For more information on
IPMI, please refer to the IPMI User's Guide posted on our website at
External PCI-E Ports
Four external PCI-E x16 ports are located on the I/O back panel. These ports can be split
into eight x8 ports to support eight hosts.
1.6 Ports
2
1
4
3
3
3
3
Rear I/O Ports
Item
Description
1
IPMI LAN Port 1
2
IPMI LAN Port 2
3
PCI-E x16 External Port (Gen 3)
4
UID Button
