16
SuperStorage SSG-136R-NR32JBF User's Manual
•
In single rack installations, stabilizers should be attached to the rack. In multiple rack in-
stallations, the racks should be coupled together.
•
Always verify that the rack is stable before extending a server or other component from
the rack.
•
You should extend only one server or component at a time. Extending two or more simul-
taneously might cause the rack to become unstable.
System Precautions
•
Review the electrical and general safety precautions in Appendix A.
•
Determine the placement of each component in the rack
before
you install the rails.
•
Install the heaviest components at the bottom of the rack first. Subsequent components
should be installed in decreasing order of weight.
•
Use a regulating uninterruptible power supply (UPS) to protect the system from power
surges and voltage spikes and to keep your system operating in case of a power failure.
•
Allow any drives and power supply modules to cool before touching them.
•
When not servicing, always keep the front door of the rack and all covers and panels
closed to maintain proper cooling.
Rack Mounting Considerations
Ambient Operating Temperature
If installed in a closed or multi-unit rack assembly, the ambient operating temperature of
the rack environment may be greater than the room's ambient temperature. Therefore,
consideration should be given to installing the equipment in an environment compatible with
the manufacturer’s maximum rated ambient temperature (TMRA).
Airflow
Equipment should be mounted into a rack so that the amount of airflow required for safe
operation is not compromised.
Mechanical Loading
Equipment should be mounted into a rack so that a hazardous condition does not arise due
to uneven mechanical loading.
