36
Chapter 3: Maintenance and Component Installation
Figure 3-9. Finding the Physical Device Object Name (Method 2)
•
The physical device object name of a disk may also be obtained Devices and Printer
Management. Open the Property window of a SSD by right clicking its icon and select the
Properties windows as shown below:
With "Disk drives" under the Type header selected (as shown above), click on the Properties
button to open the properties window. As above, the Physical Device Object Name can be
found under the Property pull-down menu under the Details tab.
Confirm that the Physical Device Object Name of the target disk number matches the number
obtained from the device icon in Devices and Printers Management. Once the match has
been confirmed, the device may then be removed or ejected under the Devices and Printers
window. This removal/ejection method and method of confirmation are the same as detailed
previously in the simple removal/ejection case section.
6. Hot Insert a Replacement NVMe SSD.
The replacement NVMe SSD may now be hot inserted. After Windows discovers the newly
inserted SSD, it’s ready for configuration and access.
