Supermicro SUPERSERVER 8048B-C0R3FT, Руководство пользователя

Страница: 153 / 156

B-1
Appendix B: System Speci fi cations
Appendix B
System Specifi cations
Processors
Quad Intel E7-4800/8800 v3 Series series (Socket R1 type) processors
Note:
In order to install the E7-4800/8800 v3 Series CPU, you must make sure that BIOS
1.0 version is installed to your system.
Note:
You must install at least two processors for full I/O functions to be supported.
Note:
Please refer to our web site for a complete listing of supported processors.
Chipset
One Intel C602J chipset
BIOS
16 MB SPI AMI BIOS® SM Flash BIOS
Memory Capacity
The X10QBL-(CT) serverboard supports thirty-two (32) 240-pin DIMM
sockets that can support up to 1 TB of Registered (RDIMM) or up to 2 TB
of Load Reduced (LRDIMM) ECC DDR3 1600/1333/1066 MHz speed
S D R A M i n a t w o - c h a n n e l m e m o r y b u s w i t h m e m o r y s i z e s o f
4GB, 8GB, 16GB, 32GB and 64GB size @ 1.35V/1.5V voltages.
SAS/SATA Controller
Intel C602J on-chip controller for six-port SATA subsystem (two SATA 3.0 and
four SATA 2.0 ports), which is RAID 0, 1, 5 and 10 Windows/LINUX supported.
The SATA drives are hot-swappable units.
A LSI 3008 SAS controller is integrated into the X10QBL-CT serverboard
to provide an eight port SAS (Serial Attached SCSI) subsystem, which is
RAID 0, 1, 1E and JBOD supported (8048B-C0R3FT server only). The SAS
drives are hot-swappable units.
Drive Bays
Five hot-swap 3.5" drive bays to house up to fi ve SATA or SAS drives (additional
fi ve 3.5" hard drives available with optional M35 mobile rack), and three 5.25"
peripheral drive bays