Supermicro SUPERSERVER 8048B-C0R3FT, Руководство пользователя

Страница: 130 / 156

7-20
SUPERSERVER 8048B-TR3F/C0R3FT User's Manual
SATA Port 0~ Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Display of drive number and capacity as detected by the BIOS
•
Software Preserve
Port 0~ Port 5
Select Enabled to enable a SATA port speci fi ed by the user. The options are
Disabled and Enabled.
Port 0 ~ Port 5 Hot Plug
This feature designates the port speci fi ed for hot plugging. Set this item to
Enabled for hot-plugging support, which will allow the user to replace a SATA disk
drive without shutting down the system. The options are
Enabled
and Disabled.
Port 0 ~ Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to initialize the
device. The options are Enabled and
Disabled
.
SATA Thermal Throttling Timing (Available for SATA Port 0/Port 1 only)
Use this item to con fi gure the interactive settings for thermal throttling. The
options are Solid State Drive, Hard Disk Drive and
Auto
.
*If the item above "Confi gure SATA as" is set to IDE, the following items
will display:
Serial ATA Port 0~ Port 5
This item indicates that a SATA port speci fi ed by the user is not installed or not
present.
•
Display of drive number and capacity as detected by the BIOS
•
Software Preserve
SATA Thermal Throttling Timing (Available for SATA Port 0/Port 1 only)
Use this item to con fi gure the interactive settings for thermal throttling. The
options are Solid State Drive, Hard Disk Drive and
Auto
.
*If the item above "Confi gure SATA as" is set to RAID, the following items
will display: