Supermicro SUPERSERVER 8048B-C0R3FT, Руководство пользователя

Страница: 81 / 156

Chapter 5: Advanced Serverboard Setup
5-25
Chassis Intrusion
A Chassis Intrusion header is located
at JL1 on the motherboard. Attach an
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# De fi nition
1 Intrusion Input
2 Ground
SATA DOM Power Connectors
Two power connectors for SATA DOM
(Disk_On_Module) devices are located
at JSD1/JSD2. Connect appropriate
cables here to provide power support
for your Serial-Link DOM devices.
DOM PWR
Pin Defi nitions
Pin# De fi nition
1 +5V
2 Ground
3 Ground
T-SGPIO
Pin Defi nitions
Pin# De fi nition Pin# De fi nition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 NC
NC = No Connection
Power SMB
Pin Defi nitions
Pin# De fi nition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V
Power SMB (I 2 C) Connector
Power System Management Bus (I
2
C)
connector (JPI
2
C1) monitors power
supply, fan and system temperatures.
See the table on the right for pin
de
fi nitions.
Standby Power Header
The +5V Standby Power header is
located at JSTBY1 on the motherboard.
See the table on the right for pin
de
fi nitions. (You must also have a card
with a standby power connector and a
cable to use this feature.)
Standby PWR
Pin Defi nitions
Pin# De fi nition
1 +5V Standby
2 Ground
3 No Connection
T-SGPIO 1/2 Headers
Two SGPIO (Serial_Link General
Purpose Input/Output) headers
are located on the motherboard.
T-SGPIO1/2 supports onboard SATA
connections on the X10QBL(-CT). See
the table on the right for pin de
fi nitions.