Supermicro SUPERSERVER 8048B-C0R3FT, Руководство пользователя

Страница: 124 / 156

7-14
SUPERSERVER 8048B-TR3F/C0R3FT User's Manual

QPI Per Socket Confi guration

CPU 0/CPU 1
IO Resource Allocation Ratio
Use this feature to set the IO resource-allocation ratio (from 0-8). The default
setting is
1
.
MMIOL Resource Allocation Ratio
Use this feature to set the Memory-Mapped IO resource-allocation ratio (from
0-8). The default setting is
1
.
IIO UniPhy Disable
Select Yes to hide the entire UNIFY in the L2 cache. The options are
No
, Yes,
and Yes w/Memory Hot Add.

Memory Confi guration
This section displays the following Integrated Memory Controller (IMC)
information.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other
than what is speci
fi ed in the speci fi cation. The options are
Auto
, 1067, 1333,
1600, 1867, and 2133.
ODT (On-Die Termination) Timing Mode
Use this feature to configure the timing mode setting for the ODT (On-
Die Termination) where the termination resistor for impedance matching in
transmission lines is located inside a chip instead of on a printed circuit board.
The options are
Aggressive Timing
and Conservative Timing.
MxB Rank Sharing Mapping
Use this feature to select the address-mapping setting for memory-rank sharing
to enhance extended multimedia platform performance. The options are
Maximum Performance
and Maximum Margin.