manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 127 / 155

Поделиться
Скачать
Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 127

Chapter 6: BIOS

127

Default Options

Restore Optimized Defaults

To set this feature, select Restore Defaults from the Exit menu and press <Enter> to load 
manufacturer default settings which are intended for maximum system performance but not 
for maximum stability.

Save As User Defaults

To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This 
enables the user to save any changes to the BIOS setup for future use.

Restore User Defaults

To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use 

this feature to retrieve user-defined settings that were saved previously.

Boot Override

This feature allows the user to override the Boot priorities sequence in the Boot menu, and 

immediately boot the system with a device specified by the user instead of the one specified 

in the boot list. This is a one-time override.

Содержание SuperServer 7089P-TR4T




























































































































































Отзывы:

Нет отзывов