manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 118 / 155

Поделиться
Скачать
Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 118

118

SuperServer 7089P-TR4T User's Manual

When SEL is Full

This feature allows the user to determine what the BIOS should do when the system event 
log is full. Select Erase Immediately to erase all events in the log when the system event log 
is full. The options are 

Do Nothing

 and Erase Immediately.

Custom EFI Logging Options

Log EFI Status Codes

Select EFI (Extensible Firmware Interface) Status Codes to log EFI status codes. Select Error 
Codes to log EFI error codes. Select Progress Code to log the EFI progress code. Select 
both to log both EFI error codes and progress codes. The options are Disabled, Both, 

Error 

code

 and Progress code.

Note

: After making changes on a setting, be sure to reboot the system for the changes to 

take effect.

BMC Network Configuration

The following items will be displayed:

• 

IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is

 

Failover

. 

• 

IPMI Network Link Status: This item displays the IPMI Network Link status. The default 
setting is

 Dedicated LAN

. 

• 

Current Configuration Address Source: This feature displays the source of the current IPMI 

LAN address. The default setting is

 DHCP (Dynamic Host Configuration Protocol)

. 

• 

Station IP Address: This feature displays the Station IP address for this computer. This 
should be in decimal and in dotted quad form (i.e., 192.168.10.253).

• 

Subnet Mask: This feature displays the sub-network that this computer belongs to. The 
value of each three-digit number separated by dots should not exceed 255.

• 

Station MAC Address: This feature displays the Station MAC address for this computer. 
Mac addresses are 6 two-digit hexadecimal numbers.

• 

Gateway IP Address: This feature displays the Gateway IP address for this computer. This 
should be in decimal and in dotted quad form (i.e., 192.168.10.253).

• 

VLAN: Select Enabled to enable IPMI VLAN support. The options are 

Enabled

 and Dis-

abled.

Содержание SuperServer 7089P-TR4T




























































































































































Отзывы:

Нет отзывов