manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 113 / 155

Поделиться
Скачать
Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 113

Chapter 6: BIOS

113

If this option is set to Enable, the following screen and items will display:

• 

Active PCR Banks

• 

Available PCR Banks

Pending Operation

Use this feature to schedule a TPM-related operation to be performed by a security (TPM) 
device at the next system boot to enhance system data integrity. Your system will reboot to 
carry out a pending TPM operation. The options are 

None

 and TPM Clear.

Note

: Your system will reboot to carry out a pending TPM operation.

Platform Hierarchy (for TPM Version 2.0 and above)

Select Enabled for TPM Platform Hierarchy support which will allow the manufacturer to utilize 

the cryptographic algorithm to define a constant key or a fixed set of keys to be used for 

initial system boot. This early boot code is shipped with the platform and is included in the 

list of "public keys". During system boot, the platform firmware uses this trusted public key 

to verify a digital signature in an attempt to manage and control the security of the platform 

firmware used in a host system via a TPM device. The options are 

Enabled

 and Disabled.

Storage Hierarchy

Select Enabled for TPM Storage Hierarchy support that is intended to be used for non-privacy-
sensitive operations by the platform owner such as an IT professional or the end user. Storage 
Hierarchy has an owner policy and an authorization value, both of which can be set and are 
held constant (-rarely changed) through reboots. This hierarchy can be cleared or changed 
independently of the other hierarchies. The options are 

Enabled

 and Disabled.

Endorsement Hierarchy

Select Enabled for Endorsement Hierarchy support, which contains separate controls to 

address the user's privacy concerns because the primary keys in this hierarchy are certified 

by the TPM or a manufacturer to be constrained to an authentic TPM device that is attached 

to an authentic platform. A primary key can be an encrypted, and a certificate can be created 
using TPM2_ ActivateCredential. It allows the user to independently enable "flag, policy, and 

authorization value" without involving other hierarchies. A user with privacy concerns can 
disable the endorsement hierarchy while still using the storage hierarchy for TPM applications 
and permitting the platform software to use the TPM. The options are 

Enabled

 and Disabled.

PH (Platform Hierarchy) Randomization (for TPM Version 2.0 and above)

Select Enabled for Platform Hierarchy Randomization support, which is used only during the 
platform developmental stage. This feature cannot be enabled in the production platforms. 
The options are 

Disabled

 and Enabled.

Содержание SuperServer 7089P-TR4T




























































































































































Отзывы:

Нет отзывов