Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 11

Страница: 11 / 155

Chapter 1: Introduction

Control Panel/CPU Module LED Indicators

Item Feature

Description

Power LED

Indicates power is being supplied to the system power supply. This LED is green when the
system is operating and amber when in standby mode.

Information LED

See table below.

Power Button

Used to apply or remove power to the system. Turning off system power with this button

removes the main power but maintains standby power. To perform most maintenance tasks, you
should also unplug the AC power cords before servicing.

CPU Module
Connection LED

When illuminated, this green LED indicates a CPU module is properly installed and functioning.

Memory Error LEDs

This array of LEDs is provided to indicate a memory slot on the CPU board that has failed. If
illuminated red, the designations (A1, A2, etc.) correspond to the failed slot on the CPU board.

Information LED

Status

Description

Continuously on and red

An overheat condition has occurred (this may be caused by cable congestion).

Blinking red (1Hz or 1/sec.)

Fan failure, check for an inoperative fan.

Blinking red (.25Hz or 4/sec.)

Indicates a power supply module has failed.

Figure 1-1. Chassis Control Panel

1.4 Server Chassis Features

Control Panel/CPU Module Indicators

The switches and LEDs located on the control panel are described below.

Figure 1-2. CPU Module LED Indicators

Содержание SuperServer 7089P-TR4T




























































































































































Результаты поиска

Содержание SuperServer 7089P-TR4T

Отзывы:

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 11 / 155

Результаты поиска

Содержание SuperServer 7089P-TR4T

Отзывы: