manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 112 / 155

Поделиться
Скачать
Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 112

112

SuperServer 7089P-TR4T User's Manual

High Precision Timer

Select Enabled to activate the High Precision Event Timer (HPET) that produces periodic 
interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing 
multimedia streams, providing smooth playback and reducing the dependency on other 
timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU. 
The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. 
The options are 

Enabled

 and Disabled. 

Trusted Computing (Available when a TPM device is installed 

and detected by the BIOS)

When a TPM (Trusted-Platform Module) device is detected in your machine, the following 
information will be displayed.

• 

TPM2.0 Device Found

• 

Vendor

• 

Firmware Version 

Security Device Support

If this feature and the TPM jumper (JPT1) on the motherboard are both enabled, the onboard 

security (TPM) device will be enabled in the BIOS to enhance data integrity and system 
security. Please note that the OS will not show the security device. Neither TCG EFI  protocol 
nor INT1A interaction will be made available for use. If you have made changes on the setting 

on  this  item,  be  sure  to  reboot  the  system  for  the  change  to  take  effect. The  options  are 

Disable and 

Enable

. 

Содержание SuperServer 7089P-TR4T




























































































































































Отзывы:

Нет отзывов