manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 10 / 155

Поделиться
Скачать
Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 10

10

SuperServer 7089P-TR4T User's Manual

1.3 System Specifications

The following table provides you with an overview of the main features and specifications of 
the 7089P-TR4T. Please refer to Appendix C for additional specifications.

System Specifications

Motherboard

X11OPi

Chassis

SC718SAC-R4800

CPU

The 7089P-TR4T system includes 8 X11OPi-CPU boards, and supports up to 8 Intel® Xeon Intel® 81xx series processor, 

which offers 3 full-width Intel UltraPath Interconnect (UPI) links with the data transfer rates of up to 10.4 GT/s in each direction 

among 8 CPUs.

Socket Type

Socket P (LGA 3647)

Memory

Eight (8) CPU boards that support up to 12 TB of 96 DDR4 3DS Load Reduced (3DS LRDIMM), Load Reduced (LRDIMM), or 
Registered (RDIMM) ECC 2666/2400/2133/1866/1600/1333 MHz memory

Notes:

 

1. For your system memory to work properly, please use memory modules of the same type and the same speed on the 
motherboard. 
2. For more information on CPU, memory support, please refer to the X11OPi board section in chapter 3. 
3. Memory speed support depends on the processors used on the motherboard.

Chipset

Intel C621 chipset

Expansion Slots

CPU modules: sixteen (16) FHFL PCI-e 3.0 x16 slots, two (2) (CPU Slot1/Slot2) on each X11OPi-CPU board.

PCIE modules: five (5) FHHL PCI-e 3.0 x16 slots, one (1) on each RSC-X11OPi-PCIE board. 

Storage module: two (2) LP PCI-e 3.0 x8 in x16 slots (Slot1/Slot2) on the AOM-X11OPi-HDD board.
PCH module: two (2) M.2 PCI-e 3.0 x4 slots (Slot1/Slot2) on the AOM-X11OPi-LBG board.

Note:

 FHHL = full-height, half-length;  FHFL = full-height, full-length; LP = low-profile 

I/O Module Slot

PCH module: 1 SIOM PCI-e 3.0 x16 slot on the AOM-X11OPi-LBG board

Hard Drives

Storage module: Default setup is eight (8) hot-swap 2.5” HDDs to on-board SATA 3.0 ports with RAID card 

options. Total capacity is sixteen (16) hot-swap 2.5” HDDs and six (6) 3.5” or eight (8) 2.5” internal fixed HDDs

PCH module: two (2) SATA 3.0 ports for SATA DOMs

Power

Five (5) 1600 Watts Titanium Level power supplies

Form Factor

7U rackmount

Dimensions

(WxHxD) 17.63 x 12.2 x 28.87-in. / 310 x 448 x 733-cm

Содержание SuperServer 7089P-TR4T




























































































































































Отзывы:

Нет отзывов