manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, Руководство пользователя, Страница: 102 / 155

Поделиться
Скачать
Supermicro SuperServer 7089P-TR4T Скачать руководство пользователя страница 102

102

SuperServer 7089P-TR4T User's Manual

Configure SATA as (Available when the item above: SATA Controller is set to 

enabled)

Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID 
to configure a SATA drive specified by the user as a RAID drive. The options are 

AHCI

 and 

RAID. (

Note:

 This item is hidden when the SATA Controller item is set to Disabled.)

SATA HDD Unlock

Select Enable to unlock SATA HDD password in the OS. The options are 

Enable

 and Disable.

SATA/sSATA RAID Boot Select (Available when the item "Configure SATA as" is set 

to "RAID")

This feature allows the user to decide which controller should be used for system boot. The 
options are None, SATA Controller, 

sSATA Controller

, and Both.  

Aggressive Link Power Management

When this item is set to Enabled, the SATA AHCI controller manages the power use of the 
SATA link. The controller will put the link in a low power mode during an extended period of 
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options 
are Enable and 

Disable

.

SATA RAID Option ROM/UEFI Driver (Available when the item "Configure SATA as" 

is set to "RAID")

Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for 
system boot. The options are Disable, EFI, and 

Legacy

.

SATA Port 0 - SATA Port 7

Hot Plug

Select Enable to support Hot-plugging for the device installed on a selected SATA port 
which will allow the user to replace the device installed in the slot without shutting down 
the system. The options are Enable and 

Disable

.

Spin Up Device

On an edge detect from 0 to 1, set this item to allow the SATA device installed on the SATA 

port specified by the user to start a COMRESET initialization. The options are Enable and 

Disable

.

SATA Device Type

Use this item to specify if the device installed on the SATA port selected by the user should 
be connected to a Solid State drive or a Hard Disk Drive. The options are 

Hard Disk Drive

 

and Solid State Drive. 

Содержание SuperServer 7089P-TR4T




























































































































































Отзывы:

Нет отзывов