Supermicro SUPERSERVER 6010H, Руководство пользователя

Страница: 50 / 110

5-16
S
UPER
S
ERVER
6010H
Manual
SLED (SCSI LED) Indicator
The SLED connector is used to pro-
vide an LED indication of SCSI ac-
tivity. Refer to Table 5-14 for con-
necting the SCSI LED.
Pin
N u m b e r
1
2
3
4
Definition
Positive
N e g a t i v e
N e g a t i v e
Positive
Table 5-14
SLED (SCSI LED) Pin
Definitions
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the
PS/2 mouse are located on J18.
See Table 5-13 for pin definitions.
(The mouse port is above the key-
board port. See Figure 5-8.)
Table 5-13
PS/2 Keyboard
and Mouse Port
Pin Definitions
(J18)
Pin
N u m b e r
1
2
3
4
5
6
Definition
D a t a
N C
G r o u n d
V C C
C l o c k
N C
Universal Serial Bus (USB)
Two Universal Serial Bus connec-
tors are located on U25. USB0 is
the bottom connector and USB1 is
the top connector.
Note: USB0 is shared with pins 25, 27, 29 and 31
of JF1 (see page 5-17). Only one of these two
connections may be used at one time.
LAN1/LAN2 Ports
Two Ethernet ports (designated
LAN1 and LAN2) are located be-
s i d e t h e V G A p o r t o n t h e I / O
backplane. These ports accept
RJ45 type cables. Two LEDs on
each indicate a successful con-
n e c t i o n ( y e l l o w ) a n d a c t i v i t y
(green).
USB0/USB1 Ports
RJ45 Ethernet Port