Supermicro SUPERSERVER 6010H, Руководство пользователя

Страница: 39 / 110

Chapter 5: Advanced Motherboard Setup
5-5
5-5 Installing Processors
Avoid placing direct pressure to the top of the pro
cessor package. Always connect the power cord last
and always remove it before adding, removing or
changing any hardware components.
1. Installing the FCPGA processors:
The has two 370-pin sockets, which support Intel FCPGA
processors. Lift the lever on the FCPGA socket and insert the processor
(with the heat sink attached) keeping the notched corner oriented toward
pin one on the socket. Make sure the processor is fully seated in the
socket and and then close the lever. You can also install a single
processor on the motherboard without changing any jumper settings.
(See Figure 5-4 for views of a 370-pin FCPGA socket before and after
processor installation.)
!
5-4 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 5-2 below for the colors and locations of the various I/O ports.
Keyboard
(Purple)
Mouse
(Green)
USB
Ports
(Black)
VGA Graphics
Port (Blue)
COM1 Port
(Turquoise)
LAN1
Figure 5-2. I/O Ports
Note: The COM2 Port is a header on the motherboard, located near the
Ultra160 SCSI channel B connector (JA3).
LAN2