Supermicro SUPERSERVER 6010H, Руководство пользователя

Страница: 3 / 110

Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 6010H. Installation and maintainance should be performed by expe-
rienced technicians only.
The SuperServer 6010H is a high-end dual processor 1U rackmount server
based on the SC810 1U rackmount server chassis and the , a dual
processor motherboard that supports either one or two 370-pin Pentium III
FCPGA processors and up to 4 GB SDRAM main memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER
mainboard and the SC810 chassis, which make up the SuperServer 6010H.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6010H into a rack and check out the server configuration prior to powering
up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general
overview of safety precautions that should be followed when installing and
servicing the SuperServer 6010H.
iii
Preface