Supermicro SUPERSERVER 2028TP-HC0R-SIOM, Руководство пользователя

Страница: 41 / 80

Chapter 5: Advanced Serverboard Setup
5-21 5-20
SUPERSERVER 2028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL
5-11 PCI-Express and SATA Connections
Figure 5-6. Driver/Tool Installation Display Screen
5-12 Installing Software
The Supermicro FTP site contains drivers and utilities for your system at ftp://ftp.
supermicro.com . Some of these must be installed, such as the chipset driver.
After accessing the FTP site, go into the CDR_Images directory and locate the ISO
file for your serverboard. Download this file to create a CD/DVD of the drivers and
utilities it contains. (You may also use a utility to extract the ISO file if preferred.)
Another option is to go to the Supermicro website at http://www.supermicro.
com/products/ . Find the product page for your serverboard here, where you may
download individual drivers and utilities.
After creating a CD/DVD with the ISO files, insert the disk into the CD/DVD drive
on your system and the display shown in Figure 5-6 should appear.
S-SATA 0-2/CPU2_PCI-Express 3.0 x16 Slot (SXB1)
A PCI-Express 3.0 x16 slot is designated SXB1. CPU2 PCE-E 3.0 x16 supports
three S-SATA 3.0 (S-SATA 0-2) connections.
I-SATA 0-5/CPU1_PCI-Express 3.0 x8 Slot (SXB2)
CPU1_PCI-Express 3.0 x8 slot designated SXB2 supports I-SATA 0-5 connections.
Refer to the layout below for the location.
SATA DOM/Power
A SATA DOM (Device-on-Disk) is lo-
cated at S-SATA3 on the serverboard.
S-SATA3 is used with a Supermicro Su-
perDOM, which is a yellow SATA DOM
connector with a power pin built in (no
external power supply is needed). The
Supermicro SuperDOM is backward-
compatible with regular SATA HDDs or
SATA DOMs that require an external
power supply. See the table on the right
for pin definitions.
SATA DOM/PWR
Pin Definitions
Pin# Signal
1
Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
8 +5V
9 Ground