Supermicro SUPERSERVER 2028TP-HC0R-SIOM, Руководство пользователя

Страница: 36 / 80

Chapter 5: Advanced Serverboard Setup
5-11 5-10
SUPERSERVER 2028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL
Speed (MT/s)
Voltage (V)
Processor & Memory Module Population Configuration
For memory to work properly, follow the tables below for memory installation.
Processors and their Corresponding Memory Modules
CPU# Corresponding DIMM Modules
CPU 1 P1-
DIMMA1
P1-
DIMMB1
P1-
DIMMC1
P1-
DIMMD1
P1-
DIMMA2
P1-
DIMMB2
P1-
DIMMC2
P1-
DIMMD2
CPU2 P2-
DIMME1
P2-
DIMMF1
P2-
DIMMG1
P2-
DIMMH1
P2-
DIMME2
P2-
DIMM F2
P2-
DIMMG2
P2-
DIMMH2
Processor and Memory Module Population for Optimal Performance
Number of
CPUs+DIMMs
CPU and Memory Population Configuration Table
(For memory to work properly, please follow the instructions below.)
1 CPU &
2 DIMMs
CPU1
P1-DIMMA1/P1-DIMMB1
1 CPU &
4 DIMMs
CPU1
P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1
1 CPU &
5~8 DIMMs
CPU1
P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1- Any memory pairs in P1-
DIMMA2/P1-DIMMB2/P1-DIMMC2/P1-DIMMD2 slots
2 CPUs &
4 DIMMs
CPU1 + CPU2
P1-DIMMA1/P1-DIMMB1, P2-DIMME1/P2-DIMMF1
2 CPUs &
6 DIMMs
CPU1 + CPU2
P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1
2 CPUs &
8 DIMMs
CPU1 + CPU2
P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-
DIMMG1/P2-DIMMH1
2 CPUs &
9~16 DIMMs
CPU1/CPU2
P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-
DIMMG1/P2- Any memory pairs in P1, P2 DIMM slots
Memory Support for E5-2600 (v3)-based Serverboards
Type
Ranks Per
DIMM and
Data
Width
DIMM
Capacity (GB)
Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) & DIMM Per Channel (DPC)
1 Slot Per
Channel
2 Slots Per Channel
1DPC 1DPC 2DPC
4Gb 8Gb 1.2V 1.2V 1.2V
RDIMM SRx4 8GB 16GB 2133 2133 1866
RDIMM SRx8 4GB 8GB 2133 2133 1866
RDIMM DRx8 8GB 16GB 2133 2133 1866
RDIMM DRx4 16GB 32GB 2133 2133 1866
LRDIMM QRx4 32GB 64GB
2133 2133 2133
Memory Support for E5-2600 (v4)-based Serverboards
Type
Ranks Per
DIMM and
Data
Width
DIMM Capacity
(GB)
Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) and DIMM Per
Channel (DPC)
1 Slot Per
Channel
2 Slots Per Channel
1DPC 1DPC 2DPC
4Gb 8Gb
1.2V 1.2V 1.2V
RDIMM SRx4 8GB 16GB 2400 2400 2133
RDIMM SRx8 4GB 8GB 2400 2400 2133
RDIMM DRx8 8GB 16GB 2400 2400 2133
RDIMM DRx4 16GB 32GB
2400 2400 2133
LRDIMM QRx4 32GB 64GB
2400 2400 2400
LRDIMM
3DS
8Rx4 64GB 128GB 2400 2400 2133
5-6 Adding PCI Expansion Cards
The 2028TP-HTR/HC0R/HC1R-SIOM includes two preinstalled riser cards per
node, designed specifically for use in the -R2K04BP2 2U rackmount
chassis. the RSC-R1UTP-E16R riser supports a single PCI-E 3.0 x16 card on the
right side of the system (when viewed from the rear) and the RSC-P-6 riser supports
one PCI-E 3.0 x16 card on the left side of the chassis.
Installing an Expansion Card
1. After powering down the system, remove the PCI slot shield.
2. Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shield protects the serverboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.