Supermicro SuperServer 1019P-WTR, Руководство пользователя

Страница: 6 / 73

11 10
SuperServer 5019P-WT/WTR User's Manual Chapter 1: Introduction
Control Panel Features
Item Feature Description
1 UID Button
Depressing the UID (unit identifier) button illuminates an LED on both the front
and rear of the chassis for easy system location in large stack configurations.
The LED will remain on until the button is pushed a second time.
2 Information LED See table below for details.
3 NIC2 LED Indicates network activity on LAN port 2 when flashing
4 NIC1 LED Indicates network activity on LAN port 1 when flashing
5 HDD LED Indicates activity on a hard drive when flashing.
6 Power LED
Indicates power is being supplied to the system power supply. This LED should
normally be illuminated when the system is operating.
7 Reset Button The reset button is used to reboot the system
8 Power Button
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing
Information LED
Status Description
Continuously on and red An overheat condition has occurred. (This may be caused by cable congestion.)
Blinking red (1 Hz) Fan failure: check for an inoperative fan.
Blinking red (0.25 Hz) Power failure: check for an inoperative power supply.
Solid blue Local UID has been activated. Use this function to locate the server in a rack environment.
Blinking blue (300 Msec) Remote UID has been activated. Use this function to locate the server from a remote location.
Figure 1-1. Control Panel View
1 8 7 6 5 4 3 2
1 1 1 1
5 5
4
2
Front Chassis Features
Item Feature Description
1 Hard Drive Carrier Carrier for hot-swap hard drive
2 USB 3.0/COM Port Tray (Optional) USB 3.0/COM port tray (see Note below)
3 DVD ROM Drive (Optional) slim DVD-ROM drive (see Note below)
4 Control Panel Front control panel with LEDs and buttons (see preceding page)
5 Rack Ear Brackets Secures the server chassis to the rack
Figure 1-2. Chassis Front View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
Chassis Front
The 815TQC-605WB/R504WB is a 1U rackmount chassis See the illustration below for the
features included on the front of the chassis.
3