Chapter 6: BIOS
SuperServer 5019P-WT/WTR User's Manual
77
76
Patrol Scrub Interval
This feature allows you to decide how many hours the system should wait before the
next complete patrol scrub is performed. Use the keyboard to enter a value from 0-24.
The default setting is
24
.
IIO Configuration
EV DFX Features
When this feature is set to Enable, the EV_DFX Lock Bits that are located on a proces-
sor will always remain clear during electric tuning. The options are
Disable
and Enable.
CPU Configuration
IOU0 (II0 PCIe Br1)
This item configures the PCI-E port Bifuraction setting for a PCI-E port specified by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and
Auto
.
IOU1 (II0 PCIe Br2)
This item configures the PCI-E port Bifuraction setting for a PCI-E port specified by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and
Auto
.
IOU2 (II0 PCIe Br3)
This item configures the PCI-E port Bifuraction setting for a PCI-E port specified by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and
Auto
.
MCP0 (II0 PCIe Br4)
This item configures the PCI-E port Bifuraction setting for a PCI-E port specified by
the user. The options are x16 and
Auto
.
MCP1 (II0 PCIe Br5)
This item configures the PCI-E port Bifuraction setting for a PCI-E port specified by
the user. The options are x16 and
Auto
.
IOAT Configuration
Disable TPH
Transparent Huge Pages (TPH) is a Linux memory management system that enables
communication in larger blocks (pages). Enabling this feature will increase perfor-
mance. The options are
No
and Yes.
Memory RAS Configuration
Static Virtual Lockstep Mode
Select Enable to run the system's memory channels in lockstep mode to minimize
memory access latency. The options are
Disable
and Enable.
Mirror Mode
This feature allows memory to be mirrored between two channels, providing 100%
redundancy. The options are
Disable
, Mirror Mode 1LM, and Mirror Mode 2LM.
UEFI ARM Mirror
Select Enable to support the UEFI-based address range mirroring with setup option.
The options are
Disable
and Enable.
Memory Rank Sparing
Select Enable to enable memory-sparing support for memory ranks to improve memory
performance. The options are
Disable
and Enable.
Correctable Error Threshold
Use this item to specify the threshold value for correctable memory-error logging, which
sets a limit on the maximum number of events that can be logged in the memory-error
log at a given time. The default setting is
10
.
SDDC Plus One
Single device data corr1 (SDDC Plus One) organizes data in a single bundle
(x4/x8 DRAM). If any or all the bits become corrupted, corrections occur. The x4 con-
dition is corrected on all cases. The x8 condition is corrected only if the system is in
Lockstep Mode. The options are
Disable
and Enable.
ADDDC Sparing
Adaptive Double Device Data Correction (ADDDC) Sparing detects when the prede-
termined threshold for correctable errors is reached, copying the contents of the failing
DIMM to spare memory. The failing DIMM or memory rank will then be disabled. The
options are
Disable
and Enable.
Patrol Scrub
Patrol Scrubbing is a process that allows the CPU to correct correctable memory
errors detected on a memory module and send the correction to the requestor (the
original source). When this item is set to Enable, the IO hub will read and write back
one cache line every 16K cycles, if there is no delay caused by internal processing.
By using this method, roughly 64 GB of memory behind the IO hub will be scrubbed
every day. The options are Disable and
Enable
.
Содержание SuperServer 1019P-WTR
Страница 58: ...108 SuperServer 5019P WT WTR User s Manual...
