SuperServer 5019P-WT/WTR User's Manual
45
44
Chapter 3: Maintenance and Component Installation
Power Supply
The SC815TQC chassis comes equipped either with a 600 Watt (5019P-WT) or with two
redundant 500 Watt (5019P-WTR) hot-plug power supplies. These power supplies are auto-
switching capable and automatically sense and operate at a 100v to 240v input voltage. An
amber light will be illuminated on the power supply when the power is off. An illuminated
green light indicates that the power supply is operating.
Power Supply Failure
The SC815TQC chassis includes a redundant power supply, which allows the server to
continue running when one power supply has been removed. Replacement units can be
ordered directly from Supermicro.
Replacing the Power Supply
1. Unplug the AC power cord from the failed power supply module (with the RED LED lit
up).
2. Push the release tab (on the back of the power supply) as illustrated, then pull the
power supply out using the handle provided.
3. Push the new power supply module into the power bay until you hear a click (replace
with the same model).
4. Reconnect the power cord to the new module and make sure the GREEN LED is lit up
and the power supply fans are rotating..
Figure 3-7. Removing/Replacing a Power Supply
Release Tab
Note:
The figures above is intended to show the power supply locations only. The chassis
and serverboard may differ from that found in the 5019P-WT/WTR.
Содержание SuperServer 1019P-WTR
Страница 58: ...108 SuperServer 5019P WT WTR User s Manual...
