Supermicro SuperServer 1019P-WTR, Руководство пользователя

Страница: 28 / 73

53 52
Chapter 4: Motherboard Connections SuperServer 5019P-WT/WTR User's Manual
Back Panel USB 3.0
Pin Definitions
Pin# Definition Pin# Definition
A1 VBUS B1 Power
A2 D- B2 USB 2.0 Differential Pair
A3 D+ B3
A4 Ground B4 Ground of PWR Return
A5 StdA_SSRX- B5 SuperSpeed Receiver
A6 St B6 Differential Pair
A7 GND_DRAIN B7 Ground for Signal Return
A8 StdA_SSTX- B8 SuperSpeed Transmitter
A9 St B9 Differential Pair
Front Panel USB 2.0
Header Pin Definitions
Pin# Definition Pin# Definition
1 +5V 2 +5V
3 USB_N 4 USB_N
5 USB_P 6 USB_P
7 Ground 8 Ground
9 Key 10 NC
USB Type A
Header Pin Definitions
Pin# Definition Pin# Definition
1 VBUS 2 D-N
3 D-P 4 GND
5 Stda_SSRX-N 6 Stda_SSRX-P
7 GND_DRAIN 8 Stda_SSTX-N
9 Stda_SSTX-P 10 CG
11 CG 12 CG
13 CG
Universal Serial Bus (USB) Ports
There are two USB 2.0 ports (USB0/1) and two USB 3.0 ports (USB7/8) on the I/O back panel.
The motherboard also has three front access USB 2.0 headers (USB2/3, USB4/5, USB6) and
one front access USB 3.0 header (USB10/11). The USB9 header is USB 3.0 Type A. The
onboard headers can be used to provide front side USB access with a cable (not included).
Connectors
Disk-On-Module Power Connector
The Disk-On-Module (DOM) power connectors at JSD1 and JSD2 provide 5V power to a
solid-state DOM storage device connected to one of the SATA ports. See the table below for
pin definitions.
SATA Ports
The X11SPW-CTF/-TF has eight I-SATA 3.0 ports and two S-SATA 3.0 ports that are supported
by the Intel C622 chipset.
M.2 Slot
M.2 is formerly known as Next Generation Form Factor (NGFF). The M.2 slot is designed
for internal mounting devices. The X11SPW-TF motherboard deploys an M key dedicated for
SSD devices with the ulitmate performance capability in a PCI Express 3.0 X4 interface for
native PCI-E SSD support. It can also support SATA devices.
DOM Power
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground