Chapter 6: BIOS
SuperServer 5019P-WT/WTR User's Manual
85
84
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are
Onboard
and Offboard.
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
Onboard SAS Option ROM
Select Enabled to enable SAS Option ROM support to boot the computer using a SAS device
specified by the user. The options are Disabled,
Legacy,
and EFI.
Onboard LAN Device
Use this feature to enable or disable Onboard LAN devices. The options are Disabled and
Enabled.
Onboard LAN1 Option ROM
Use this feature to select which firmware function to be loaded for LAN Port1 used for system
boot. The options are Disabled,
Legacy
, and EFI.
Onboard LAN2 Option ROM
Use this feature to select which firmware function to be loaded for LAN Port2 used for system
boot. The options are
Disabled
, Legacy, and EFI.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy,
and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are
Enabled
and Disabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and
Enabled
.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are
Disabled
and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and
Enabled
.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are
Disabled
and Enabled.
PXE Boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is
0
.
Media Detect Count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is
1
.
Super IO Configuration
The following Super IO information will display:
•
Super IO Chip AST2500
Serial Port 1 Configuration
This submenu allows the user to configure the settings of Serial Port 1.
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled
.
Device Settings
This item displays the status of a serial part specified by the user.
Serial Port 1 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 1 are
Auto
, (IO=3F8h; IRQ=4;), (IO=3F8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=3E8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
Serial Port 2 Configuration
This submenu allows the user the configure settings of Serial Port 2.
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled
.
Содержание SuperServer 1019P-WTR
Страница 58: ...108 SuperServer 5019P WT WTR User s Manual...
