Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 311 / 404

7-183
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Threshold
Clicking the T
HRESHOLD
tab brings up the PIM T
HRESHOLD
C
ONFIGURATION
page
( Figure 7-163 ). The parameters for this page are shown in Table 7-131 .
Figure 7-163. PIM Threshold Configuration Page
Table 7-131. PIM Threshold Configuration Page Parameters
Parameter Description
Group Threshold
This parameter is a bits-per-second (BPS) value that when it exceeds a
certain value, initiates source specific counters for a particular group.
Source Threshold
This parameter is a bits-per-second (BPS) value that when exceeds a
certain value, initiates switching to shortest path tree.
Switching Period
This parameter specifies the time interval that the data rate is monitored
for, initiating the counters or for switching to SPT.
RP Threshold
When the number of registered packets received exceeds this threshold
value, RP initiates switching to SPT.
RP Switching Period
This parameter specifies the time interval for which the registered packets
are monitored to initiate switching to SPT.