Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 287 / 404

7-159
Chapter 7: Layer 2/3 Ethernet Switch Firmware
RIP
Clicking the RIP tab brings up the RRD RIP C
ONFIGURATION
page ( Figure 7-139 ), which
allows you to re-distribute the routes that are learnt through other routing protocols to
RIP. The parameters for this page are shown in
Table 7-112 .
Figure 7-139. RRD RIP Configuration Page
Table 7-112. RRD RIP Configuration Page Parameters
Parameter Description
RIP Status This parameter enables or disables redistribution for RIP.
Default Metric
This parameter specifies the metric for the routes that are being
re-distributed.
Import
You can use this parameter to choose to import Direct routes, Static routes,
OSPF routes and BGP routes to RIP.
Route Tag Type
This parameter describes whether a tag is manually configured or
automatically generated.
Route Tag
This parameter indicates the route tag in case you configure a manual
option for the tag type.