Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 270 / 404

Superblade Network Modules User’s Manual
7-142
Interface
Clicking the I
NTERFACE
tab brings up the I
NTERFACE
S
ETTINGS
page ( Figure 7-126 ). The
parameters for this page are shown in Table 7-99 .
External LSDB Limit
This parameter specifies maximum number of non-default
AS-external-LSAs entries that can be stored in the link-state database.
Exit Overflow Interval
This parameter specifies the time interval in seconds a router will attempt
to leave OverflowState.
Demand Extension This parameter indicates the router's support for demand routing.
Reference Bandwidth
This parameter specifies Reference bandwidth in kilobits/seconds, for
calculating default interface metrics.
SPF Delay
This parameter indicates the delay in routing calculation after a topology
change.
SPF Hold Time
This parameter specifies the minimum time between two consecutive SPF
calculations.
Default Passive Interface
This parameter specifies whether all the OSPFv3 interfaces created after
this setting are passive or not.
Trace Level This parameter defines the level of trace required for OSPFv3.
Figure 7-126. Interface Settings Page
Table 7-98. OSPFv3 Basic Settings Page Parameters (Continued)
Parameter Description