Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 149 / 404

7-21
Chapter 7: Layer 2/3 Ethernet Switch Firmware
IP Authorized Manager
Clicking the IP A
UTH
M
ANAGER
tab brings up the IP A
UTHORIZED
M
ANAGER
page
( Figure 7-17 ), which allows you to configure allowed management nodes for managing
the switch. The parameters for this page are shown in Table 7-7 .
Figure 7-17. IP Authorized Manager Page
Table 7-7. IP Authorized Manager Page Parameters
Parameter Description
IP Address
This parameter specifies the IP address of the manager. An address
0.0.0.0 indicates “Any Manager”.
Subnet Mask
This parameter specifies the sub-network mask for the specified IP
address.
Port List (Incoming)
This lists the port through which the manager can access this switch. Ports
can be comma separated or provided as a range (for example 1,2,3 or 1-3
or 1,2-3).
VLANs Allowed
This parameter specifies the VLANs through which the manager can
access this switch. VLANs can be comma seperated or provided as range
(for example 1,2,3 or 1-3 or 1,2-3).
Services Allowed
These control buttons are used to indicate the service type, and can be
one or more of the following: T
ELNET
, SSH, HTTP, HTTPS, SNMP or ALL.