Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 296 / 404

Superblade Network Modules User’s Manual
7-168
IGMP Snooping Configuration
Clicking the B
ASIC
S
ETTINGS
tab brings up the IGMP S
NOOPING
C
ONFIGURATION
page
( Figure 7-148 ), which allows you to configure IGMP snooping parameters. The
parameters for this page are shown in Table 7-118 .
Figure 7-148. IGMP Snooping Configuration Page
Table 7-118. IGMP Snooping Configuration Page Parameters
Parameter Description
System Control This parameter Starts or Shutsdown IGS in the switch.
IGMP Snooping Status
This parameter enables or disables IGMP snooping globally in the switch.
To enable IGS, GMRP status must be
Disabled .
Operational Status
This parameter enables or disables IGMP snooping operationally in the
switch. To enable IGS, GMRP status must be
Disabled .
Proxy Reporting
This parameter indicates whether the proxy reporting in the IGMP
snooping switch is to be enabled or disabled.
Snooping Mode
This parameter specifies the IGMP snooping multicast forwarding mode,
which can be configured using the Destination IP Address or the
Destination MAC Address.
Report Forwarding
This parameter specifies whether the IGMP reports are forwarded on all
ports or only on router ports.