Supermicro SuperBlade SBM-GEM-X2C+, Руководство пользователя

Страница: 130 / 404

Superblade Network Modules User’s Manual
7-2
The utility starts with a default IP address, which is also the management IP address.
This IP address is essentially provided for remote management of this switch. For
managing the switch through web browsers, type in the default IP address in your
browser’s web address in order to start accessing the switch.
For example, if the management IP address of the switch is 192.168.1.1 , the switch can
be accessed through the Web browser by typing http://192.168.1.1 in the address space
of the web browser.
The default management IP address for Supermicro Switch products is
192.168.100.102 . This default IP address can be changed in the S
YSTEM
S
ETTINGS
page
in the System Management section.
The management interface for the SBM-GEM-X2C(+), SBM-GEM-X3S+ and the
SBM-XEM-X10SM is the same as that for the Supermicro standalone SSE-G24-TG4
and SSE-G48-TG4 1/10-Gigabit Ethernet switch modules.
For the SSE-G48-TG4 and SSE-G24-TF4 switches, you can connect to any of the front
panel 1G ports or back panel 10G ports to manage the switch with the default
management IP. These switches will create VLAN 1 by default with this IP address,
including all 1G and 10G ports.
The SBM-GEM-X2C(+), SBM-GEM-X3S+ and SBM-XEM-X10SM blade switches can
be managed with the default IP through CMM Ethernet connections, since their internal
management Ethernet ports are connected with CMM Ethernet ports internally. If you
prefer to manage the SBM-GEM-X2C(+) or SBM-XEM-X10SM switch through front
panel ports or through any other switching ports, then you can assign the desired
management IP address to VLAN 1. Alternatively, you can create any VLAN and
manage the switch through switching ports. Here the term switching ports refer to all
internal and external 1G and 10G ports of the switch.
Nomenclature
The following nomenclature applies to screens found in this chapter:
• Port */* – This indicates the stacking ID number, port number
• Port Number GB */* – This is for an internal port
• Port Number Ext */* – This is for an external port.