Supermicro SuperBlade SBI-7125W-S6, Руководство пользователя

Страница: 58 / 94

SBI-7125W-S6 Blade Module User’s Manual
5-20
4. To remove a hotspare from an array, select it in the right panel and click R
EMOVE
H
OT
S
PARE
.
5. Click N
EXT
.
The V
IRTUAL
D
ISK
C
REATION
screen appears, as shown in Figure 5-11 .
6. The A
RRAYS WITH
F
REE
S
PACE
menu lists the new array(s) that you just defined, plus
any existing arrays with holes (free space) that could be used for a new
configuration.
Select the array to use for the new virtual disk.
7. In the right panel, select RAID 1 as the RAID level.
8. (Optional) Set S
IZE
(in MB) to a lower number if you do not want to use the entire
available capacity for the new virtual disk.
9. (Optional) Change the other V
IRTUAL
D
ISK
P
ROPERTIES
, if necessary.
10. Click A
CCEPT
to accept the configuration of the new virtual disk.
11. Click N
EXT
to continue with the next confi guration step.
The V
IRTUAL
D
ISK
S
UMMARY
window appears.
12. Review the configuration shown in the window. If you want to change something,
click B
ACK
and change the confi guration parameters.
13. Click F
INISH
to accept the configuration and start the initialization process (unless
you selected N
O
I
NITIALIZATION
earlier).
Using Manual Configuration: RAID 5
Follow these steps to create a RAID 5 storage configuration using the M
ANUAL
C
ONFIGURATION
mode of the Configuration Wizard.
1. In the A
RRAY
S
ELECTION
screen ( Figure 5-10 ), select three available drives in the left
panel. Click the R
IGHT
A
RROW
button to move the selected drives to the right panel.
2. Click A
CCEPT
to accept these drives for the new RAID 5 array.
NOTE: Click the R
ECLAIM
button if you want to undo a virtual disk that you just
defined.
NOTE: MegaRAID Storage Manager software will not allow you to select the
disk drive on which the operating system is installed or any other drives that are
already part of a configuration.
NOTE: To remove a single drive from a proposed new array, select the drive
icon in the right panel and click the Left Arrow button.