Supermicro SuperBlade SBI-7125W-S6, Руководство пользователя

Страница: 27 / 94

3-9
Chapter 3: Setup and Installation
Installing a Hard Drive
1. Remove a blank drive carrier from the blade (see removal procedure above).
2. Insert a drive into the carrier with the PCB side facing down and the connector end
toward the rear of the carrier.
3. Align the drive in the carrier so that the screw holes of both line up.
4. Secure the drive to the carrier with six screws as shown in Figure 3-7 .
5. Insert the drive carrier into its slot keeping the Open button at the bottom. When the
carrier reaches the rear of the bay the release handle will retract.
6. Push the handle in until you hear the carrier click into its locked position.
Figure 3-7. Installing a Hard Drive in a Carrier