Supermicro SuperBlade SBI-7125W-S6 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 94

background image

5-1

Chapter 5

RAID Setup Procedure

RAID setup for the SBI-7125W-S6 blade module is done using the MegaRAID Storage
Manager software utility.

MegaRAID Storage Manager software is a configuration and monitoring utility used with
the Embedded MegaRAID Software. This section provides a brief overview of the
MegaRAID Storage Manager software and explains how to install it on the supported
operating systems.

5-1

MegaRAID Storage Manager Software Overview

MegaRAID Storage Manager software enables you to configure, monitor, and maintain
storage configurations created under Embedded MegaRAID Software. The MegaRAID
Storage Manager graphical user interface (GUI) makes it easy for you to create and
manage storage confi gurations.

Creating Storage Configurations

MegaRAID Storage Manager software enables you to easily confi gure the controllers,
disk drives, and virtual disks on your workstation or server. The Configuration Wizard
greatly simplifies the process of creating arrays and virtual disks.

You can use the Configuration Wizard Auto Configuration mode to automatically create
the best possible configuration with the available hardware. You can use the Guided
Configuration mode, which asks you a few brief questions about the configuration, and
then creates it for you. Or you can use the Manual Configuration mode, which gives you
complete control over all aspects of the storage confi guration.

Monitoring Storage Devices

MegaRAID Storage Manager software displays the status of virtual disks, physical disks,
and other storage devices on the workstation or server that you are monitoring. System
errors and events are recorded in an event log file and are displayed on the screen.
Special device icons appear on the screen to notify you of disk failures and other events
that require immediate attention.

NOTE:

Before adding a new drive to an array, back up any data contained on

the new drive. Otherwise, all data will be lost.

NOTE:

MegaRAID Storage Manager software can be used to manage a wide

range of MegaRAID controllers. Some MegaRAID Storage Manager software
features are not applicable for Embedded MegaRAID Software.

«
...
37
38
39
40
41
...
»

Содержание SuperBlade SBI-7125W-S6































































































Отзывы:

Нет отзывов

Похожие инструкции для SuperBlade SBI-7125W-S6

Бренд: Synology Страницы: 15

Бренд: TYANO Страницы: 68

SUPERSERVER 6028TP-HTFR

Бренд: Supero Страницы: 141

Бренд: Sun Microsystems Страницы: 138

Vlinx VESR4 4 Series

Бренд: B&B Electronics Страницы: 70

Бренд: Ubiquiti Страницы: 28

IP-DECT SERVER 400

Бренд: SpectraLink Страницы: 221

60 Business Phone

Бренд: ESI Страницы: 2

Бренд: Dataton Страницы: 23

Бренд: Planet Страницы: 72

DeviceMaster PRO

Бренд: Comtrol Страницы: 174

Бренд: Lantronix Страницы: 110

Бренд: 3onedata Страницы: 3

Бренд: x-odos Страницы: 58

Бренд: Xiva Страницы: 41

Бренд: AMX Страницы: 2

Бренд: Acnodes Страницы: 103

Бренд: QUANTA Страницы: 65

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды