Supermicro SuperBlade SBI-7125W-S6, Руководство пользователя

Страница: 57 / 94

5-19
Chapter 5: RAID Setup Procedure
9. Click N
EXT
to continue with the next configuration step. The V
IRTUAL
D
ISK
S
UMMARY
screen appears.
10. Review the configuration shown in the V
IRTUAL
D
ISK
S
UMMARY
screen. If you want to
change something, click B
ACK
and change the configuration parameters.
11. Click F
INISH
to accept the configuration and start the initialization process (unless
you selected N
O
I
NITIALIZATION
earlier).
Using Manual Configuration: RAID 1
Follow these steps to create a RAID 1 storage configuration using the M
ANUAL
C
ONFIGURATION
mode of the Configuration Wizard:
1. In the A
RRAY
S
ELECTION
screen ( Figure 5-10 ) select two available drives in the left
panel. Click the R
IGHT
A
RROW
button to move the selected drives to the right panel.
2. Click A
CCEPT
to accept these drives for the new RAID 1 array.
3. To add a hotspare to an array, select an available drive in the left panel. Select the
array from the drop-down menu, and click A
DD
H
OTSPARE
T
O
, as shown in
Figure 5-12 .
Figure 5-12. Array Selection Screen – Adding a Hotspare
NOTE: MegaRAID Storage Manager software will not allow you to select the
disk drive on which the operating system is installed or any other drives that are
already part of a confi guration.