Supermicro SuperBlade SBI-7125W-S6, Руководство пользователя

Страница: 25 / 94

3-7
Chapter 3: Setup and Installation
Figure 3-5. 8-slot DIMM Numbering
DIMM Installation
Installing DIMM Memory Modules
1. Power down the blade module (see "Powering Down a Blade Unit" on page 3-1 ).
2. Remove the blade from the enclosure and the cover from the blade (see
"Removing/Replacing the Blade Cover" on page 3-2 ).
3. Remove the air shroud that covers the DIMM slots.
4. Insert each DIMM vertically into its slot, starting with slots 1A and 2A. Pay attention
to the notch along the bottom of the module to prevent inserting the DIMM
incorrectly (see
Figure 3-6 ).
NOTE: Though multiple DIMM memory module types and speeds may be
supported, you need to use DIMM memory modules of the same speed and
type.
WARNING: Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
Center of
Board
Edge of
Board
Toward CPU1
DIMM
1
A
DIMM
1
B
DIMM
2
A
DIMM
2
B
DIMM
3
A
DIMM
3
B
DIMM
4
A
DIMM
4
B