2-14
S
UPER P4SPA+/P4SPE User's Manual
Keyboard Wake-Up
The JPWAKE jumper is used together
with the Keyboard Wake-Up function
in the BIOS. Enable both jumper and
BIOS settings to allow the system to
be awakened when the user presses
a key on the keyboard. See the
table on the right for jumper settings.
Your power supply must meet ATX
specifi cation 2.01 or higher and sup-
ply 720 mA of standby power to use
this feature.
Jumper
Position
1-2
2-3
Definition
Disabled
Enabled
Keyboard Wake-Up
Jumper Settings
(JPWAKE)
Power On
Instead of using the chassis power on
switch, you may close jumper JP20 to
apply power to the system. See the
table on the right for jumper settings.
The default setting is Open (normal).
Jumper
Position
Open
Closed
Definition
Normal
Force Power On
Power On
Jumper Settings
(JP20)
Pin
Position
Open
Closed
Definitions
Disabled
Enabled
Overheat Fan Force On
(JP1)
Chassis/Overheat Fan
Select
A header for the Overheat Fan Force
On is located at JP1. Close Pins 1 &
2 of JP 1 to enable the function of OH
Fan Force On, which will force the OH
Fan to stay on at all times, and the OH
Fan will function as a normal Chassis
Fan. The default setting is "Open" to
disable this function. In this situation,
the OH Fan will not be turned on un-
less an overheat condition occurs.
