Chapter 2: Installation
2-17
1.5V 8xAGP Slot
The P4SPA+/P4SPE includes an 8xAGP slot for high-performance video cards. It
is backward compatible with 4xAGP and 2xAGP graphics cards.
To install a VGA card, power down the system and remove the I/O shield correspond-
ing to the AGP slot. Then, pull back the locking tab on the slot before inserting your
VGA card. After the card is inserted, close the locking tab if possible (some VGA
cards have a notch at the corner of the board to lock it into place, others do not).
Replace all chassis covers before restoring power to the system.
Locking Tab
Figure 2-5. 8xAGP Slot
