S
UPER P4SPA+/P4SPE
User's Manual
4-8
**If both Primary IDE and the Secondary IDE drives are populated, the Award
BIOS will assign Tertiary for the item Onboard SATA1, and Quad for the item
Onboard SATA2. (***The last option is supported by XP or the later version of
OS only.)
On-Chip Serial ATA Port0/Port1 Mode
.
The feature allows you to confi gure SATA Port0/Port1 Settings. The options are
Primary Master, Primary Slave, Secondary Master, Secondary Slave, Logical
Primary, Logical Secondary, Tertiary Master, and Quaternary Master. The default
setting for On-Chip SATA Port0 is
Logical Primary
, and the default setting for
Port1 is
Logical Secondary
.
USB Controller
This setting allows you to enable or disable the USB Controller. The options are
Enabled
, and Disabled.
USB 2.0 Controller
This setting allows you to enable or disable the USB 2.0 (EHCI) Controller. The
options are
Enabled
, and Disabled.
USB Legacy Support
This setting allows you to enable or disable the functions of USB, Keyboard/Mouse
under POST and DOS. The options are
Disabled
, and Enabled.
USB KB Wake-Up From S3
This setting allows you to enable or disable the function of USB KB Wake-Up
from S3. The options are
Disabled
, and Enabled.
AC97 Audio
Select Disable to disable the AC 97 Controller. Select Auto to allow the BIOS
select AC97 automatically. The options are
Auto
, and Disabled.
CPU THRM-Throttling
THRM throttling is used to lower power consumption and reduce the heat
generated by the CPU. The options for this setting are
87.5%
, 75%, 62.5%,
50%, 37.5%, 25%' and 12.5%'.
