S
UPER P4SPA+/P4SPE
User's Manual
4-12
CPU Warning Temperature
This allows you to set the CPU warning temperature threshold. If the CPU temperature
reaches this threshold, an alarm will be activated and a warning message will
be displayed on the screen. The options are Disabled, 60
0
C/140
0
F, 65
0
C/149
0
F,
70
0
C/158
0
F,
75
0
C/167
0
F
, 80
0
C/176
0
F and 85
0
C/185
0
F.
*Note :
In the Windows OS environment, the Supero Doctor III settings take pre-
cedence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the
temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set
in the BIOS.
Resources Controlled By
This setting allows BIOS to automatically confi gure all boot and Plug and Play
compatible devices. If you choose Auto, you cannot select the IRQ, DMA and
memory base address fi elds, because BIOS automatically assigns them. The
options are
Auto <ESCD>
and Manual.
4-4.5 Hardware Monitors
There are only three settings on this menu (below). The rest of this menu shows
various temperatures and voltage levels as indicated.
