Chapter 4: UEFI BIOS
89
RcompTarget[RdOdt]
RcompTarget[WrDS]
RcompTarget[WrDSCmd]
RcompTarget[WrDSCtl]
RcompTarget[WrDSClk]
DllBwEn[0]
DllBwEn[1]
DllBwEn[2]
DllBwEn[3]
Enter a desired numeric value above for each feature. The default of these features is
0
.
Load line Calibration
This feature controls the load line calibration. The options are Disabled, Level 1, Level 2,
Level 3, Level 4, Level 5, Level 6, Level 7, and
Auto
.
Core Voltage Mode
This feature controls the core voltage mode. The options are
Adaptive
and Override.
VF Point Offset Mode
Use this feature to select Legacy or Selection mode. The options are Legacy and
Selection
.
*If the feature above is set to Legacy, the following features will become available for
configuration:
Core Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the IA Core domain. The
default is
Auto
.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative (-). The options are
“
+
” and “-”.
Note:
If there is any change to this setting, you will need to power off and reboot the
system for the change to take effect.
Core Extra Turbo Voltage
Enter a numeric value for the extra turbo voltage (in mV) that will be applied while IA Core
is operating in turbo mode. The default is
Auto
.
