Chapter 4: UEFI BIOS
93
Re-try Boot
If this feature is enabled, the BIOS will automatically reboot the system from a specified boot
device after its initial boot failure. The options are
Disabled
, Legacy Boot, and EFI Boot.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
jumper settings when it is expired for more than five minutes. The options are
Disabled
and Enabled.
AC Loss Policy Depend on
Use this feature to set the power state after a power outage. Select Stay Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off, Power On, and
Last State
.
Power Button Function
This feature controls how the system shuts down when the power button is pressed.
Select 4 Seconds Override for the user to power off the system after pressing and holding
the power button for four seconds or longer. Select Instant Off to instantly power off the
system as soon as the user presses the power button. The options are
Instant Off
and 4
Seconds Override.
DeepSx Power Policies
This feature enables DeepSx Power Policy configuration. The options are
Disabled
and
Enabled in S4-S5.
Connectivity Configuration
Note:
This submenu becomes configurable when a CNVi device is plugged into the moth
-
erboard. It's already built-in in C9Z490-PGW.
Connectivity Configuration
The following information will be displayed:
• CNVi present
- display the status of wireless connection
CNVi Configuration
CNVi WiFi&BT
This feature enables CNVi WiFi and Bluetooth support. The options are Disabled and
Enabled
.
