Super C9Z490-PG/-PGW User's Manual
110
Disable Turbo GT frequency
This feature disables Turbo GT frequency. If set to Enabled, Turbo GT frequency be-
comes disabled. If set to Disabled, GT frequency limiters will be removed.The options
are
Disabled
and Enabled.
SATA And RST Configuration
SATA And RST Configuration
SATA Controller(s)
This feature enables SATA device(s). The options are Disabled and
Enabled
.
*If this feature is set to Enabled, the following features will become available for
configuration:
SATA Mode Selection
This feature controls SATA mode(s). The options are
AHCI
and Intel RST Premium With
Intel Optane System Acceleration .
*If this feature is set to Intel RST Premium With Intel Optane System Acceleration,
the following features will become available for configuration:
SATA Interrupt Selection
Select which interrupt will be available to the OS. The options are
Msix
, Msi, and Legacy.
PCI-E M.2-M1
/
PCI-E M.2-M2
This feature appears if an M.2 device is plugged in and RAID is selected in the
feature. Use this feature to enable or disable RST PCIe storage remapping. The
options are RST Controlled and
Not RST Controlled
.
Note:
The feature shown here is depending on the scoket of M.2 device plugged into
the motherboard.
RAID Device ID
Use this feature to select a RAID device ID. The options are
iRST Mode
and Alternate.
Storage Option ROM/UEFI Driver
This feature controls the execution of UEFI and legacy storage OpROM. The options are Do
not launch,
UEFI
, and Legacy.
Teton Glacier Mode
Use this feature to select Teton Glacier Mode. The options are Dynamic Configuration for
Hybrid
Storage Device Enable and
Disabled
.
Note:
This feature becomes configurable when the
is set to iRST Mode.
