Super C9Z490-PG/-PGW User's Manual
86
GTU Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the GT domain. The
default is
0
.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative (-). The options
are “
+
” and “-”.
Memory Profile
This feature controls the memory profile. The options are
Default profile
and Custom profile.
*If this feature above is set to "Custom profile", the following memory configurations
become available:
Memory Reference Clock
This feature controls the memory reference clock, in MHz. The options are
133
and 100.
QCLK Odd Ratio
If set to Enabled, this feature adds the Memory Reference Clock amount to the QCLK
frequency. The options are
Disabled
and Enabled.
Memory Frequency
Use this feature to set the frequency of the memory installed. The options are Auto,
DDR4-1067MHz, DDR4-1333MHz, DDR4-1600MHz, DDR4-1867MHz, DDR4-2133MHz,
DDR4-2400MHz, DDR4-2667MHz, DDR4-2933MHz, DDR4-3200MHz, DDR4-3467MHz,
DDR4-3733MHz, DDR4-4000Hz, DDR4-4267MHz, DDR4-4533MHz, DDR4-4800MHz,
DDR4-5067MHz, DDR4-5333MHz, DDR4-5600MHz, DDR4-5867MHz, DDR4-6133MHz,
DDR4-6400MHz, DDR4-6667MHz, DDR4-6933MHz, DDR4-7200MHz, DDR4-7467MHz,
DDR4-7733MHz, DDR4-8000MHz, and DDR4-8267MHz.
Advanced Memory OC Setting
*The features below are available when the
Processor
Realtime Memory Timing
This feature enables realtime memory timing changes to be made after MRC_DONE. The
options are
Disabled
and Enabled.
tCL
This festure configures the Cas Latency Range. Enter a numeric value between 0-31.
The default is
15
.
