Supermicro 5018D2-AR12L, Руководство пользователя

Страница: 76 / 124

6-6
S
UPER
S
TORAGE
S
YSTEM 5018D2-AR12L/D4-AR12L/D8-AR12L User's Manual
Replacing a System Fan
1. If necessary, open the top rear cover of the chassis while the system is
running to locate the position of the failed fan. Do not run the server for an
extended time with the cover off.
2. Power down as described in Section 6-3.
3. Remove the failed fan's power cable from the motherboard.
4. Remove the four pins securing the fan to the fan housing.
5. Lift the failed fan from the fan housing and out of the chassis.
6. Place the new fan into the vacant space in the fan housing, while making
sure the arrows on the top of the fan (indicating air direction) point in the
same direction as the arrows on the other fans in the same fan housing.
7. Reconnect the fan wires to the same chassis fan header as the previous fan.
8. Power up the system and check that the fan is working properly before re-
placing the chassis cover.
6-6 Installing an Expansion Card
The chassis supports one low profile PCIe expansion card.
Figure 6-6. Expansion Card
Low Profile
Card