Supermicro 5018D2-AR12L, Руководство пользователя

Страница: 59 / 124

Chapter 5: Advanced Motherboard Setup
5-13
TPM/Port 80 Header
Pin Definitions
Pin # Definition Pin # Definition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
DOM PWR Connector
The Disk-On-Module (DOM) power con-
nectors, located at JSD1 and JSD2,
provide 5V power to a solid state DOM
storage device connected to the SATA
port. See the table on the right for pin
definitions.
DOM PWR
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
4-pin External I 2 C BMC Header
A System Management Bus header for
IPMI 2.0 is located at JIPMB1. Connect
the appropriate cable here to use the IPMI
I 2 C connection on your system.
External I 2 C Header
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Overheat LED Header
The JOH1 header is used to connect
an LED indicator to provide warnings of
chassis overheating Refer to the tables
on the right for pin definitions.
TPM Header/Port 80 Header
A Trusted Platform Module/Port 80 head-
er, located at JTPM1, provides Trusted
Platform (TPM) support and Port 80 con-
nection. Use this header to enhance sys-
tem performance and data security. See
the table on the right for pin definitions.
Note : Please go to the following link for
more information on TPM: http://www.
supermicro.com/manuals/other/TPM.pdf
OH Status (Red LED)
State Definition
Off Normal
Solid Overheat
Overheat LED
Pin Definitions
State Definition
1 3.3V
2 OH Active