Supermicro 5018D2-AR12L, Руководство пользователя

Страница: 18 / 124

2-4
S
UPER
S
TORAGE
S
YSTEM 5018D2-AR12L/D4-AR12L/D8-AR12L User's Manual
2-5 Installing the System into a Rack
This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
Note:
These rails will fit a rack between 25.6" and 33" deep.
Installing the Chassis into a Standard Rack
The chassis package includes two sets of rack rails, one set for the right side of the
chassis and one for the left. Each set consists of an inner rail that is fixed directly
to the chassis and an outer rail that attaches to the rack.
The inner rails are pre-attached and do not interfere with normal use of the chassis
if you decide not to install it into a rack.
Figure 2-1. Identifying the Sections of the Rack Rails
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
Outer Rails--
slide together
Inner Rail--
pre-attached to the
chassis
Front and Rear
Brackets--
attach to the rack